OLYMPUS DIGITAL CAMERADrilling Equipment Available

We maintain some of the most sophisticated drilling equipment in the industry and our highly diversified drilling experience allows us to support nearly any project.

Sonic Drill SDC 390-14

  • Casing Diameters: 4, 6, and 8-inch sonic tooling.
  • Maximum Depth: 600 feet, currently tooled to 300 feet.
  • Fastest drilling method for environmental investigations.
  • Full size power on compact platform.
  • Minimal site disturbance.
  • Faster penetration with reduced waste.
  • Highly representative discrete core samples.
  • Excels in the most difficult formations.

Geoprobe 3230DT Track Rig

  • Probe Tooling Diameters: 2.25 to 6.0-inch direct push casing.
  • Up to 8.25-inch hollow stem augers.
  • Combination head enables direct push and sampling.
  • Track mounted, allows for limited access drilling.
  • Angle drilling.
  • NX and HQ coring.
  • Geotechnical work.
  • Air rotary and hammer; 2, 4 and 6-inch.

Geoprobe 3200 Truck Mount Rig

  • Probe Tooling Diameters: 2.25 to 6.0-inch direct push casing.
  • Up to 8.25-inch hollow stem augers.
  • Combination head enables direct push and sampling.
  • Angle drilling.
  • NX and HQ coring.
  • Geotechnical work.
  • Air rotary and hammer; 2, 4 and 6-inch.
  • Ability to operate under store canopy.

Boart Longyear BK66 XHD

  • Auger Diameters: 2.25 to 8.25-inch hollow stem augers. 2 and 3-inch split spoons.
  • Maximum Depth: 4.25-inch augers to 175 feet, 6.625-inch augers to 100 feet.
  • Grout pump.
  • NX and HQ coring.
  • ODEX casing advancement system.
  • Flush-joint casing; 3, 4, 5 and 6-inch.
  • Air rotary and hammer; 2, 4 and 6-inch.
  • Geotechnical sampling.
  • Roller bits; 2 to 8-inch.

Foremost Mobile B3500

  • Casing Diameters: 2.25-inch macrocore.
  • 2.25 and 6.625-inch hollow stem augers.
  • 2 and 3-inch split spoons.
  • Maximum Depth: 4.25-inch augers to 75 feet.
  • Air rotary and hammer.
  • Direct-push soil probe tooling.
  • Discrete soil and water sampling.
  • NX coring.
  • 4-inch drive and wash.
  • Geotechnical sampling.

Geoprobe 6610 Track Rig

  • Casing Diameters: 2.25 to 3.25-inch macrocore. 4.25 to 6.625-inch hollow stem augers.
  • Discrete water and soil sampling.
  • Chemical injection.
  • Track mounted, allows for limited access drilling.
  • Vapor point installation.

Other Equipment

SAFEX soft dig unit, air compressor with air knife, Geoprobe manual soil sampler, NX coring equipment, HQ wireline coring equipment, Shelby tubes, flush joint casing, 2 to 6-inch air hammers, 3.875 to 5.875-inch roller bits, concrete core drills, steam cleaners, pressure washers, limited access mats, confined space entry equipment, pumps and generators for development of monitoring wells. Chemical injection manifolds, pumps, and mixing tanks. Trucks equipped with lift gates for efficient drum handling.

  • Injection rods.
  • Soil vapor point install.
  • Macrocore.
  • Groundwater profiles.
  • 3-inch casing and sampler.
  • Dual wall sampling.
  • 1-inch hand sampling.
  • Injection trailer.
  • Pilot test trailer.
  • Groundwater treatment trailers.